123.hp.com/setup: Complete USB Printer Setup For Windows
Set up the HP printer using the USB cable to make a stable connection between the printer and the computer. Whenever you bring a new printer, you will need its drivers, so that you can get pro like prints. However, to complete the setup, you have to go to- 123.hp.com/setup and get the required drivers.
Therefore, to connect the printer with the computer you will need a USB and perform a few steps. But before this learn, how to download and install the full feature HP driver and software. The drivers help the computer in transferring the information in the language that the printer can understand and give them the command to print.
Go to 123.hp.com/setup and download your printer driver, then follow the on-screen instructions to install it. Now you need to connect your printer with the computer for Windows using the USB cable. Though, keep on reading because here in this blog you will get all the information related to it.
Follow The Steps For Connecting Printer And Computer
Step 1: Prepare for the printer setup
First, you need to check the requirements and are important for the connection. Delete any previously installed printer versions and prepare it for the USB connection setup.
1. Confirm the follow the requirements and items mentioned below:
· The printer should be on and in a ready state.
· Take a USB cable less than 3m in length.
· There is an available USB port on your computer.
· If you connected the USB cable with the computer before installing the HP driver, then continue with these steps to remove the printer from the installed devices to help ensure a successful setup. Otherwise, you can skip this step.
2. Disconnect the printer USB cable from the computer, and do not reconnect the cable until asked during the installation setup.
3. Now search Windows for ‘devices’ and then open ‘Devices and Printer’ control panel window.
4. Next right-click the icon for your printer model and select Remove device. If multiple icons are available for the printer, then remove them all.
5. Close the Devices and Printers window and then continue to the next step.
Step 2: Install the driver and setup up the connection
Download and install the best available printer drivers to complete the USB connection. To get the correct printer drivers, you will need to enter your printer’s model number.
1. Go to 123.hp.com/setup and then enter your printer model and follow the on-screen instructions to download your printer driver.
2. Click on the Download option, to download the setup file,
3. Now locate the setup file on your computer.
4. After finding it, double-click on the set-up file to open it.
5. Run the file, and click on Install.
6. Then follow the on-screen instructions to complete the installation process.
7. When prompted by the installed to choose the connection option, select the USB option.
8. Now continue with the installation process and complete the setup.
After the setup is completed, now you can use print, scan or fx feature of the HP printer depending on the functionality of your printer. Though HP launches modern printers, that are available to print the HD prints, can scan images and documents, you can use them to send or receive the fax as well as you can get as much as duplex copies you want.
To set up a printer you will find the set-up manual 123.hp.com that comes inside the printer box. Hence, you can also use it to learn the steps about any set-up process, or you can take the expert help. While doing the setup, or during the print, if you get any error, you can contact the HP printer professionals. As they are trained and have enough knowledge to solve the errors.
We hope that the guide is useful to you! Enjoy the happy printing with the HP printers.
Very nice blogs!!! I have learned a lot of information for this sites...thanks for Sharing wonderful blog.
ReplyDelete123.hp.com/setup OJ