HP Deskjet 3630 not printing | Get assistance from 123.hp.com

 There could be several times when you would find yourself in 123.hp.com/setup 3630 not printing situation. You will either get blank pages or errors while you try to print. You don’t have to worry about it as you can simply follow the steps that we will be sharing with you as per your condition.

 

123.hp.com/setup | Deskjet 3630 Printer Doesn’t Print Black or in Color Ink 

If you find yourself in HP Deskjet 3630 not printing black or in color then these steps are for you.

·        Firstly, check the ink levels of your ink cartridge. If it is low then change it with HP Deskjet 3630 new ink cartridge.

·        After that, turn on your printer and you can clean the print head of your printer with the automated tool

·        You need to go to printer settings and set up. Click the clean print head option there.

·        Once the cleaning process is over, the printer will print a test page.

·        Analyze the test report to see if there is any error there.

·        You have to repeat the steps one or two times to safeguard the perfect working on the basis of the results.

·        You need to keep in mind you have to always turn off the printer with the power button.

·        You can try to remove the defective ink cartridge and print in the single cartridge mode.

·        Try printing the print quality report and check the quality report for smears, gaps and other defects.

 

Get a printer status report |123.hp.com/setup 

You can try to print a printer status report to analyze the printer problem and to resolve the problem cause with 123.hp.com/setup. The printer status report comes with a lot of useful information about your printer. You can troubleshoot HP Deskjet 3630 not printing issue with the help of this information.

You can use these steps to get the report:

·        Load paper in the printer and adjust the paper width guide at first

·        Turn on the printer by pressing the power button

·        After that, press and hold the cancel button for 3 seconds which will print the Printer Status Report.

·        You can also confirm the normal working of the printer with the help of the printer report.

·        If it doesn’t then the the problem might be with printer or system, software, printing app or the device settings.

 

123.hp.com | HP Deskjet 3630 Prints Blank Page 

If your printer is in a good state but it still prints blank pages or missing colors then you can follow these steps:

·        You should only use genuine HP ink cartridge. You can order it from the official website of HP. If you are still using the cartridge and facing error then continue reading.

·        After that, check the estimated ink level. If the entire ink cartridges have an adequate ink level then you don’t need to replace them.

·        After that, try to clean the ink cartridges.

·        Turn off the printer and insert fresh paper in the input tray.

·        Now, in the printer control panel click the setup icon. Next, touch Tools and click on the ‘Clean’ cartridges option.

·        The printer will clean itself and print the Print Quality Diagnostic Report.

·        Evaluate the report and see if the quality is good.

·        If not, you have to repeat the steps until you get a satisfactory print quality report.

·        Find the ink cartridge with the issue. Check the test page and if you see the black ink result is poor then the problem is with the black cartridge.

·        After that, check the tricolor output. If you see an issue with the result then the problem is with the tri color cartridge.

·        You can also avail yourself the ink cartridge warranty if you have a defective print head in the cartridge.

·        Finally, try to replace the problem ink cartridge.

 

123.hp.com | Deskjet 3630 not printing anything 

If your Deskjet 3630 is not printing anything then you can check the ink levels to find out the issue. You can do it with the help of the steps that we will be sharing with you:

 

Check the ink levels in MAC

·        Load the fresh paper in the printer input tray and press the power button to wake up your printer.

·        Click the Apple icon in the mac system. Now select the System Preferences option.

·        After that, choose Print and fax option and choose your printer name and select ‘Open Print Queue option.

·        Pick the Settings and click Utility option and click on Supplies Status option.

 

Check the ink levels in Windows

·        Load the fresh and unused paper in the HP Deskjet printer and press the power button to turn on your printer.

·        Search for the HP folder in the system and click on the name of the printer

·        You can see that the HP printer Assistant app will open. In the window, select the ‘Maintain your printer’ option.

·        After that, check the ink level by clicking on the Estimated Ink Level tab in that window.

 

If you still find yourself in an HP Deskjet 3630 not printing  situation then you can visit 123.hp/setup to get assistance from the experts.