How To Fix The E3 Error by 123.hp.com/setup

 Easy Ways to Bypass HP Printer Error E3 with 123.hp.com

HP has been delivering Grade A printers for decades. This promise of quality and service has helped them garner immense praise and develop a huge customer base. However, like with all devices, it is too susceptible to certain anomalies.

An E3 error is one such instance. It is a frustrating error which halts your work midway. Also known as the Carriage Jam error, the E3 makes the ink cartridge carriage stall in between the work.

Since the nature of the problem is majorly physical, it can be resolved in simple ways. In this blog, 123.hp.com/setup will provide you with the ways through which you can get your printer up and running smoothly again.

Check for a Jammed Sheet:

The first thing that you should do before this step is to turn off your printer, or remove the power supply. This would be the safe way to go forward. Now follow the instructions provided by 123.hp.setup to check for any jamming on the output tray, input tray, below the printer, and in the ink cartridge access area.

Once you have cleared the jam and restarted the printer, try to print your document again. If the problem still persists, proceed to the next step.



Eject and Reinstall the Ink Cartridges:

If the cartridge is installed in an incorrect way, the printing might get hindered and cause the E3 error. Follow these steps by 123.hp.setup to ensure that the installation is correct.

  • Please ensure that the printer is turned “Off”, or remove the cord;

  • Open the external door and then the ink cartridge access door;

  • Gently pull the carriage containing ink cartridge to the center of the printer, and then lightly press the cartridge downwards to release them;

  • After that, take the cartridge out of its slot and pull it towards yourself;

  • Then proceed to slide the cartridges in the slot that is empty and then gently push every cartridge till it snaps;

  • Finally, shut the access door and then also shut the exterior door.

Reset the Printer:

If the problem still persists, then turn on your printer. Now, wait for it to get idle. Now with the printer switched on, disconnect the power cord from the side of your printer. Wait for 60 seconds, then reconnect the power cord to a wall outlet and to the printer. Turn the printer back on again, and now the reset is complete.

Get your Printer Serviced:

If the printer is not responding to any of the solutions above, then it is time to get your printer serviced by a professional. There might be a need to even get the product replaced. Contact HP Customer Support to schedule a product repair or replacement, or visit a local service center in your area. You should also confirm your warranty status by visiting the HP Product Warranty Check. A Repair fee might be charged for out-of-warranty products.


Comments

Popular posts from this blog

123.hp.com/setup | Your guide to eprint via HP Printer using a Chrome

How To Fix HP Officejet 3830 Printer Offline Problem?

What Are The Ways To Download And Install HP Printer Drivers?