Add An HP Printer To Wireless Router Via 123.hp.com/setup

 If we want quality printout at an affordable cost, then without any doubt we can go with HP Printer as it is considering the one top-notch printing machine in the worldwide. It has amazing features and provides world-class services to every individual that are beneficial for commercial as well as home purpose.  So, if you buy HP Printer for your home or office premise, you should first unbox the printer and then get it connected with your PC. Because of a newbie you may not have an idea to connect your supported HP printer to your wireless network. You don’t need to feel bad for that as we are giving the link 123.hp.com/setup where you can get entire instructions for printer setup connection wirelessly. After established a wireless connection, you will be able to print from a computer on the same network without having to attach the printer to your computer. Not all HP printers have wireless functionality; therefore before adding your printer to network, make sure the printer is capable of connecting to the Internet. Then after you can continue!

Before Connecting Your Devices Wirelessly, Perform The Following Job:

·       Unpack your printer first

·       Next, go through the setup instructions to properly remove the packaging material one-by-one

·       Now, plug-in the power cord, turn-on the printer and install the ink cartridges accordingly

·       Load the stack of plain white paper with A-size in the paper tray

·       Now, allow the printer to follow-up its startup routine, including printing an alignment page

Now, you are required to connect your supported printer to your operating device. Here, you get to learn how to do this more efficiently. So, let’s read it out!

Guidelines To Add An HP Printer To Wireless Router

Check-out the instructed points listed underneath if you really looking for the right methods to Add an HP Printer to Wireless Router. Follow the given guides step-wise:

·       First and foremost, you have to ensure that your computer and network configurations are compatible.

·       Now, go to 123.hp.com/setup to search for your printer’s software. Once you find, give a click on “Download” tab.

·       In the next step, you have to give double-click on the downloaded software file. Doing so will open the printer setup process.

·       Turn-on your printer as doing so will prepare the printer to connect.

·       Now, follow the on-screen instructions until you reach the “Network” section. The procedure may vary depending on your printer model and computer system.

·       Select “Network (Ethernet/Wireless)” from the middle of the page.

·       Now, click “Yes, send my wireless settings to the printer”. After doing that, the printer will be located and hence the wireless network’s information will send over the printer device.

·       Wait for couple of minutes for your printer to connect appropriately.

·       Finish the setup process as directed on the screen. Simply follow the rest of the on-screen prompted guide to get your printer setup successfully. Once the setup is complete, you'll be able to start using your printer for print anything.

Was It Helpful? If Not Visit 123.hp.com/setup

Have you gone through-out the above provided directives in a proper way? Unfortunately yet not able to Add An HP Printer To Wireless Router? If really it is so, then contact to tech-specialists via 123.hp.com/setup. They are extremely talented and enough proficient, so you get fruitful guidance for your printer setup and wireless connection. Feel free to unite with them!