Connect HP printer to AirPrint- 123.hp.com/setup
Printing via HP Printers using iPhone, iPad, or iPod Touch- 123.hp.com/setup
HP printers are well-known in the market for their multiple functionalities and impeccable services. The facilities offered by HP printers are much more enjoyable when connected with Apple smartphones and tablets with the iOS operating system. Using Apple AirPrint, you can easily print from most iOS apps on Apple mobile devices that have a print feature.
If you want your Hp printer to run successfully without any errors, it is advised that you must visit 123.hp.com/setup to download and install the printer drivers compatible with your system. However, in the case of iOS and macOS, most of the HP printers work perfectly with Apple AirPrint to provide full-quality printing.
H2: Step 1: Set up the network connection
You can connect the printer and your Apple device to use AirPrint wirelessly. Follow the steps given below to set up the connection carefully.
To set up the network connection, first, connect your Apple device to your local wifi network. If you are connected to a different network switch it to your local wifi.
In the next step, check the status of your printer network connection.
If you have a touch screen printer control panel follow these steps-
Select the wireless symbol given on your screen. You can also open the Network settings/ set up menu to check the status of your network connection.
If you have a printer without a touchscreen control panel, follow these steps-
Push the Wireless icon button and the Information button simultaneously.
Or you can push the Wireless icon button and the Start Copy Black button simultaneously.
This will print a Wireless test report for you showing the current status of the network connection.
Once you get to know the status of your network connection, move to the next step.
Make a proper connection of the printer o the network.
If your printer came with a touchscreen control panel:
Tap to open the set up. Click on Network, or Wireless menu.
In the next step, select Wireless Setup Wizard.
Follow the instructions given on the screen to connect your printer to the network.
If your printer came without a touchscreen control panel:
Press and hold the Wireless button and Cancel button simultaneously.
Wait for the Power light to flash, and then wait for the Wireless light to flash.
Note: If you have a Tango printer, you must wait for at least 5 sec until the edge lighting turns blue after pressing the Wireless Button on the rear of the printer.
To initiate the connection, press and hold the WPS button (Wi-Fi Protected Setup) on the router simultaneously. Once the connection is successfully built, the Wireless light on the printer will stop flashing.
H2: Step 2: Setup to Use AirPrint to print from an Apple device
Follow the detailed instructions given below to print documents or photos using AirPrint.
The first step is to make sure your printer is ready to print. Check that the power to the printer is turned on, ink cartridges are properly installed, and the paper stack is loaded in the paper tray.
Open the document/ picture you want to print on paper, and then click on the Share icon or .
Click on the Print icon and open the Printer Options.
Select the printer from which you want to print.
Modify the print settings according to your requirement, which involves, paper orientation, no. of copies, size of the print, etc.
Conclusion:
It is much easier to print with the help of AirPrint than any other device. In case your device does not support this, don’t forget to download the HP printer drivers and install it on your device from a trusted website 123.hp.com/setup. The website is a single platform that helps you with everything related to the HP printer be it a printer driver or an HP printer error to troubleshoot.
Comments
Post a Comment