123.hp/setup | Resolve common hp errors

 123.hp/setup is here to help you to fix some common hp errors 

When you use hp printer, it is natural to face some errors but that doesn’t mean that they can’t be fixed. 123.hp/setup is here to aware you of some errors that you might face and ways to fix them.

These hp errors are way too common but due to lack of knowledge, people tend to panic and think that they need an engineer to fix it but the reality is, you can do it on your own by performing some basic troubleshooting methods.

We will be listing a number of common hp errors and the ways to fix them in simple steps.

 123.hp/setup | Common HP Errors and their solutions 

The team of experts at 123.hp/setup has compiled some common hp printer related issues that you might face sooner or later and ways to fix them easily. They are listed below:

 

HP Printer error code 02 

This error is usually related to printer cable or drivers. In order to fix it, you will have to switch the printer off and disconnect the printer cable and then turn it on. If the printer displays ‘ready’ then replace the motive force. If it is still not fixed then remove the printer cable after that.

If there is still an error then there is a high possibility of a hardware problem. When your HP printer is not out of paper then this means that there is a problem with the paper sensor.

 

HP Printer error code 10 

If you use third-party toners or ink cartridges then with some confidence, 123.hp/setup can tell you that you are no stranger to this error.

The printer has a conflict with the toner cartridge or the Printer is not capable of reading the cartridge. This is also known as ‘supplies memory error’.

In order to rectify this error, the HP printer needs to read the data logged on the cartridge chip to recognize the cartridge that was installed. The main point is the connection of the printer and cartridge chip that uses two little electrical contacts. You can use an eraser to clean the electrical contact on the cartridge chip and make sure that the chip connector is working properly so that you don’t see this error. You can also try to resolve it by resetting the printer by turning it on and off. If nothing works then take out the toner cartridge and reinstall it or use an original one instead of it as the error might be because of the compatibility issues.

 

HP Printer error code 11 

This error occurs when there is no paper in the paper tray or there is an issue with the paper sensor. You need to make sure that you have placed the printer on a flat surface and see if the paper tray is clear of dust particles or not. If it is dirty then clean it thoroughly. If something is blocking the sensors then get rid of it as well. Once it is clean, add sheets in the tray and make sure that they are properly placed.

 

HP Printer error code 13 

This error occurs when the printer senses that the paper is stuck in the machine. A paper jam has occurred all the way through the machine i.e. Paper cassette, under the toner unit/fusing unit and the exit unit. ‘The paper is jammed in the machine’ message will be displayed on the screen of the hp printer.

In order to fix it, you should follow the on-screen instructions and check the paper path for paper jams in the machine. Make sure that there is no paper stuck in the Machine and open and close the entire printer covers. If no paper is found then close all printer doors and panels and see if the error message has gone or not. If not then turn off the printer and wait for a few minutes for the machine to reset and turn it back on, if this does not fix the problem and the machine still shows a paper jam then there is a possibility of a hardware problem.

 

If you face any other problem or hp printer errors then feel free to get in touch with 123.hp/setup and we will help you in the best way possible.