123.hp.com/setup | Guide to fix common HP errors

 Your guide to fix some common errors with the help of 123.hp.com/setup 

A printer is an amazing outcome of the technology which has simplified printing over the course of time. However, there is no technology that promises error-free operations but with the help of 123.hp.com/setup, you can fix these errors all by yourself.

We will be sharing a list of errors that you might be facing from time to time and ways to fix them.

 

123.hp.com/setup | Errors that occur frequently and ways to fix them 

 

HP Printer error code 14 

When you face this error, it means that the toner cartridge has not been installed. The best way to check it is by removing and reinstalling the toner cartridge. The cartridge is the core element of a printer and you don’t be able to print if there is an issue with it.

 

123.hp.com/setup | Causes of HP Printer error code 14 

·        The toner cartridge has not been installed as it should be

·        The  cassette microswitch defects

·        You are not using the recommended paper for printing

·        The toner cartridge needs to be adjusted

 

123.hp.com/setup | Ways to fix it 

·        You are required to reset the toner cartridge by installing a new one or reinstalling the old one

·        Inspect the high voltage contacts to see if there are any damages or is it dirty. Clean it thoroughly if you find any dust particles

·        Swap the high voltage power supply and then check the HVPS cable and then reset it

·        Finally, replace the DC controller and then try printing

 

HP Printer error code 16

HP Printer error code 16 usually indicates toner low issues and it needs to be replaced, filled, or shake to distribute the ink consistently.

 

123.hp.com/setup | Causes of HP Printer error code 16

·        The cartridge contact is unclean

·        There is some problem with the high voltage power supply

·        The ink has been stuck to one side

·        The contacts are not aligned

 

123.hp.com/setup | Ways to fix it 

·        Check the conductive contacts on the cartridge and the contacts next to them for any dust particles and wipe it clean with a soft cloth

·        Check the DC controller and sensor of the toner level for any damages and swap it with a new DC controller if it defects

·        Change the cartridge or shake it to distribute the toner evenly

·        Align the contacts on the high voltage power supply

 

HP Printer error code 20 

This error indicates that the HP printer has not been configured correctly which causes connection issues with the system. You will see this error when you are trying to print something and it pops up on the screen.

 

123.hp.com/setup | Causes of HP Printer error code 20 

·        The printer has not been set as the default printer

·        Missing printer driver

·        Issues in the device manager

·        There is a registry error on the laptop/desktop

 

123.hp.com/setup | Ways to fix it 

·        Check if the printer you are using has been set as the default printer or not by going to the control panel

·        Start from scratch and reinstall the USB composite device by going to the device manager

·        Reinstall the HP software and perform the setup from the beginning

·        Wipe the registry with the help of a registry cleaner program

 

HP Printer error code 22 

This error usually displays on the control panel of the printer when you are trying to scan. It might come up when there is an extra weight on the scanner glass or when you are trying to scan a heavy book or something.

 

123.hp.com/setup | Causes of HP Printer error code 22 

·        The scanner has not been set up properly and is not detected by the system

·        There is pressure on the scanner

·        There is a conflict in the scanner

·        There is an issue with the power connectivity

 

123.hp.com/setup | Ways to fix it 

·        Switch on the printer and wait for it to get in the idle state

·        Disconnect the printer from the power source and wait for a minute

·        Plug the cables back and reconnect the power cord utility to the rear part of the printer and turn it on

·        Let it go through the warm-up stage and wait till the light on the printer flashes. This will resolve the issue and try putting 1 page at a time in the scanner

 

There are some errors that you might encounter while using a printer. If you require any assistance then feel free to get in touch with experts at 123.hp.com/setup.

Comments

Popular posts from this blog

123.hp.com/setup | Your guide to eprint via HP Printer using a Chrome

How To Fix HP Officejet 3830 Printer Offline Problem?

123.hp.com/setup: Learn Printing With Apple AirPrint For Mac