Remove 13.20 Error on HP Laserjet 9000 with 123.hp.com/setup.

 HP Laserjet 9000 printer is known for its duplex printing. The device can print up to 50 pages in a minute, which is quite impressive. Suffice to say that this huge printer can easily handle the printing requirements of numerous people at once. However, it does not mean that the printer is immune from witnessing any technical issues and errors. Users of this device often face a 13.20 error. It is a result of the installation of an inappropriate fuser. It can also come about when there is any blockage in the sensor. You can always visit 123.hp.com/setup for getting help regarding any aspect of your printer. Here you will discover how to resolve this error through simple steps quickly. 





 

What are the Steps to Eliminate 13.20 Error on HP Laserjet Printer?


On encountering this error, people often get panicked and think that something is seriously wrong with their printer. But remember that HP is a renowned printer brand. Its devices do not get damaged so easily. You can get support for all printer installation and driver download-related issues from 123.hp.com. Here are some great ways to get rid of the 13.20 error. 

 

Troubleshooting steps for 13.20 error


  • Check for any paper jam in your device. Get all paper debris removed if it is present in the way of the paper within the device. You can also check for blockages by locating the sensor for pre-feed. It will undoubtedly help you to resolve this error.

  • Remove the paper tray from HP Laserjet 9000 Printer. Similarly, remove the toner cartridge. 

  • Find out if the paper is moving freely within the sensor. But if you notice any restriction in the free movement, it's time to get the paper adjusted. It is also a viable solution for this problem. 

  • Have you recently replaced the paper-feed assembly? If you have, you need to check for appropriate movement of the pre-feed flag for sensors. Inspecting the sensor movements is not tricky. You can examine the movements at the sensor's top for the page. Afterward, do not forget to see if the pre-feed sensor is properly installed. 

  • You should also determine the sensor for the fuse and look for any jam. You might find a paper lodged in this part. Gently and carefully remove the paper. 

  • Another effective fix for this issue is to replace the DC Controller PCA. 

  • Take away the toner cartridge and the paper tray before holding the paper-width cardboard. You can use it to push across the rollers for realignment. The paper-width cardboard should only be stopped when you find the cavity on the top part. 

  • Remove the cardboard carefully from the cavity at the bottom part of the printer. Reposition the cartridge and paper tray into their original place. 

  • Restart your printer.

 

Conclusion 


13.20 error will no longer trouble you now that you know the exact steps to eliminate it. Implement them, and don't forget to visit 123.hp.com/setup for getting more technical support if you need it. Start using your printer efficiently again.


Comments

Popular posts from this blog

123.hp.com/setup | Your guide to eprint via HP Printer using a Chrome

How To Fix HP Officejet 3830 Printer Offline Problem?

123.hp.com/setup: Learn Printing With Apple AirPrint For Mac